Apparel & Fashion · Sewing

How Do You Tell Whether a Sewing Pattern Includes Seam Allowance?

Published · Updated · By About Textile Editorial Team
Table of Contents

If a pattern says that the seam allowance is included, cut your fabric on the pattern’s cutting line. Do not add extra fabric around every edge. Then sew the specified distance in from the raw edge. For example, if the instructions say a 5/8-inch seam allowance is included, cut on the printed line and stitch 5/8 inch from the fabric edge unless a particular seam is marked differently.

If the pattern says to add seam allowance, the printed edge represents the intended seam line or finished pattern shape. In that case, trace the pattern and add the stated amount outside the edge before cutting fabric. The key is not to guess from the pattern’s appearance: check the instructions for that exact pattern before cutting.

What seam allowance actually means

Seam allowance is the extra fabric between the stitching line and the cutting line or raw edge. It is needed so two pieces can be sewn together without making the finished garment smaller than intended.

Think of a side seam on a simple skirt:

  • The stitching line is where your needle makes the seam.
  • The cutting line is where you cut the fabric.
  • The space between them is the seam allowance.

When seam allowance is already built into a pattern, the pattern piece is larger than the finished garment shape because that extra space is already present. Adding another allowance outside it makes the garment larger and can distort matching areas such as armholes, necklines, collars, and sleeve caps.

When seam allowance is not included, cutting directly on the pattern edge removes the fabric needed to sew the seam. The resulting garment may end up too small, and there may be too little fabric to construct or finish the edges properly.

Where to find whether seam allowance is included

Start with the pattern instructions, not the printed outline alone. The answer is commonly found in one or more of these places:

The first instruction page or pattern key

Look for a general note near sections such as “Before You Begin,” “General Instructions,” “Cutting,” or the pattern key. Wording may include:

  • “Seam allowances are included.”
  • “Seam allowance is 5/8 inch unless otherwise stated.”
  • “Seam allowances are 1.5 cm included.”
  • “Add seam allowance before cutting.”
  • “Seam allowance not included.”

A statement such as “5/8-inch seam allowance included unless otherwise noted” means you cut on the pattern line and sew 5/8 inch from the edge for ordinary seams. It also means you should look for exceptions.

Individual pattern pieces

Some patterns print seam allowance information directly on the tissue or PDF pieces. A note may identify a narrower allowance at a neckline or armhole, or a deeper allowance for a hem.

Read all text near the edge you are cutting. Different allowances on the same garment are normal. Hems often need more fabric to turn up, while curved areas may use a smaller allowance to reduce bulk.

The envelope, booklet, or download page

For printed commercial patterns, check the envelope and instruction sheets. For PDF patterns, inspect the assembly guide, the pattern information page, and any “print and cut” notes. A designer’s usual convention can be a helpful clue, but the directions supplied with the individual pattern take priority.

As one beginner discussion on r/sewing illustrates, wording such as “1.5 cm seam allowance included unless otherwise stated” was interpreted as an instruction to cut on the lines rather than add more fabric. That is a useful example of why the exact wording matters.

Cutting line versus stitching line: do not assume every printed line means the same thing

A cutting line is the line you follow with scissors or a rotary cutter. A stitching line is the path the seam should follow. On many patterns with included allowance, only the cut edge is printed; you create the stitching line by measuring inward from the raw edge as you sew.

Some patterns do show internal stitch lines, especially for details such as darts, pleats, topstitching, pockets, button placement, or construction guides. A line inside a pattern piece is not automatically a seam line, however. It could be a fold line, grainline, placement mark, lengthen/shorten line, or a style detail.

Use the pattern legend to identify its symbols. If the instructions say “cut on stitching line” or tell you to add seam allowances, treat the printed outline as the seam line and add the required width around it before cutting.

How to sew an included seam allowance accurately

You do not have to eyeball the distance from the edge. Most sewing machines have sewing machine seam guides on the throat plate or machine bed. These lines help you keep the fabric edge at a consistent distance from the needle.

Before sewing your garment, do this:

  1. Find the seam allowance specified for the seam you are about to sew.
  2. Locate the corresponding guide line on your machine’s throat plate or bed.
  3. Measure the guide from the needle if the markings are unclear, because machine markings and labels can differ.
  4. Place the raw fabric edge along that guide as you stitch.
  5. Test the setup on a scrap of the same fabric, then measure the stitched distance from the edge.

In a separate r/sewing discussion, participants described using the machine’s measurement lines rather than estimating by eye. That approach is especially helpful for beginners because it keeps the seam line consistent without marking every seam in advance.

For long, straight seams, a removable seam guide, a strip of tape, or a magnetic guide designed for your machine can make the edge position easier to follow. For tight curves, prioritize gradual, even feeding rather than trying to force the edge precisely against a guide at every moment.

When marking the stitching line is worth the extra time

Machine guides are efficient, but marking the seam line can be useful when accuracy matters more than speed. Consider marking when sewing:

  • Curved seams, such as princess seams or collars
  • Corners that must pivot at an exact point
  • A difficult fabric that shifts easily
  • A seam with an unusual allowance
  • A project where you need a visible construction reference

Use a fabric-safe marking tool, tailor’s chalk, or a thread-basted line if appropriate for the fabric. Mark only where it will help; marking every seam on a straightforward project is optional when your machine guide is accurate and easy to use.

Common mistakes that change the garment size

The most common error is adding seam allowance twice. If the pattern says it is included, do not trace the piece and add another border unless you are deliberately changing the allowance and understand how that affects adjoining pieces.

The opposite mistake is cutting on a seam line when allowance was not included. This can make every seam smaller, with the total loss adding up around the garment.

Another frequent problem is using one default allowance everywhere despite pattern exceptions. Always check hems, facings, necklines, armholes, and any edge with a special instruction. The pattern may ask you to trim, grade, clip, or finish those allowances differently after sewing.

Finally, do not rely on a supposed universal rule based on country, brand, or pattern type. Many commercial patterns include seam allowance, while some vintage, international, independent, drafting, and specialty patterns may require you to add it. The reliable answer is always in the pattern instructions.

A quick decision before you cut

Read the seam allowance note, then act on its exact language:

  • “Seam allowance included”: cut on the printed cutting line and sew the stated distance from the raw edge.
  • “Add seam allowance” or “seam allowance not included”: trace the pattern and add the required amount before cutting fabric.
  • Different allowances are listed for different edges: follow the specific notes for each edge.
  • No answer appears anywhere: pause before cutting your main fabric. Review all pages, pattern-piece labels, and the designer’s supplied materials, and test your interpretation on inexpensive fabric if needed.

Once you separate the cutting line from the stitching line, the process becomes straightforward: cut where the pattern tells you, stitch at the stated distance, and use a machine guide or marked seam line to keep that distance consistent.

References

  1. Do Sewing Patterns Include Seam Allowance? A Clear Answer (Plus How To Check Fast). sewalice.com. https://sewalice.com/do-sewing-patterns-include-seam-allowance
  2. Ultimate Sewing Seam Allowance Guide... | Sewing Basics Hub. sewingbasicshub.com. https://sewingbasicshub.com/blog/ultimate-sewing-seam-allowance-guide-2025
  3. Do Sewing Patterns Include Seam Allowance? - Own Crafting. owncrafting.com. https://owncrafting.com/sewing-techniques-tutorials/do-sewing-patterns-include-seam-allowance
  4. Question on seam allowance in pattern! : r/sewing. reddit.com. https://www.reddit.com/r/sewing/comments/1dzaot5/question_on_seam_allowance_in_pattern
  5. Do Sewing Patterns Include Seam Allowance? - Stitch and Sew. stitchandsew.net. https://www.stitchandsew.net/do-sewing-patterns-include-seam-allowance
  6. Seam allowance for garment sewing – Elise’s Sewing Studio. elisesewingstudio.com. https://elisesewingstudio.com/seam-allowance-for-garment-sewing
  7. How To Add Seam Allowance To Sewing Patterns {VIDEO TUTORIAL} - The Creative Curator. thecreativecurator.com. https://www.thecreativecurator.com/how-to-add-seam-allowance-to-a-pattern
  8. Does Your Sewing Pattern Include Seam Allowance?. sewingmadeclear.com. https://sewingmadeclear.com/guides/sewing-pattern-seam-allowance-included